Analysis of the Impact of Overtime on Work Productivity and Occupational Safety and Health in the Lembean–Marawas Road Project in North Minahasa Regency
DOI:
https://doi.org/10.58344/jws.v5i7.1688Keywords:
overtime hours, worker productivity, work motivation, occupational health, occupational safetyAbstract
This study aimed to analyze the effects of work motivation (X1), occupational health (X2), and occupational safety (X3) on worker productivity (Y) during overtime implementation in the Lembean–Marawas Road Preservation Project, North Minahasa Regency, and to evaluate the effectiveness of overtime work on workers’ physical productivity. The study employed a quantitative approach, with data collected through questionnaires distributed to 24 respondents and analyzed using IBM SPSS Statistics and Jamovi for validation and comparative testing. The F-test results indicated that work motivation, occupational health, and occupational safety simultaneously had a significant effect on worker productivity (F-count = 6.224; Sig. = 0.004), explaining 48.3% of the variance in productivity (R² = 0.483). Among the independent variables, work motivation had the strongest influence, with the highest regression coefficient (0.482). The physical productivity analysis showed that overtime was effective for stone masonry work (E = 1.0675) but ineffective for BJTP-280 plain reinforcement steel work (E = 0.4155), indicating that overtime effectiveness varied depending on the type of construction activity. The results obtained from SPSS and Jamovi produced consistent values, confirming the reliability of the statistical analysis.
References
Associated General Contractors of America. (2003). Guidelines for a successful construction project.
Busro, M. (2018). Theories of human resource management. Prenada Media Group.
Bustamin, O. G., Acid, J. N., & Alnurtama, R. M. (2023). Analysis of the effect of occupational safety and health implementation on construction workers' performance using the random sampling method. Publication of Civil Engineering Orientation Research (Protection), 5(2).
Dipohusodo, I. (1996). Project management and construction. Kanisius.
Elbandiansyah. (2019). Human resource management. CV. IRDH.
Ervianto, W. I. (2002). Construction project management. Andi.
Ervianto, W. I. (2003). Construction project management (Rev. ed.). Andi.
Ervianto, W. I. (2005). Theory–application of construction project management (1st ed.). Andi.
Ghozali, I. (2005). Application of multivariate analysis with SPSS program. Publishing Agency of Diponegoro University.
Gomes, F. C. (2003). Human resource management. Andi.
Handoko, T. H. (1984). Fundamentals of production and operations management. BPFE.
Hanna, A. S., Taylor, C. S., & Sullivan, K. T. (2005). Impact of extended overtime on construction labor productivity. Journal of Construction Engineering and Management, 131(6).
Kajian Pustaka. (2017). Definition, objectives and principles of occupational safety and health (K3). Retrieved 2025, from https://www.kajianpustaka.com
Kurniawan, W., & Nursin, A. (2021). Analysis of the effect of overtime work on construction labor productivity on lower structure work. RekaRacana: Journal of Civil Engineering, 7(2), 120–130.
Pilcher, R. (1992). Principle of construction management. McGraw-Hill.
Rochmanu, A. (2018). The effect of motivation, fatigue, health and work stress on types of overtime work on worker performance [Undergraduate thesis, Sepuluh Nopember Institute of Technology].
Siagian, S. P. (2002). Human resource management. Bumi Aksara.
Sinungan, M. (2009). What and how productivity works (2nd ed.). Bumi Aksara.
Soeharto, I. (1990). Industrial project management: Preparation, implementation, management. Erlangga.
Soeharto, I. (1995). Project management: From conceptual to operational (Vol. 1). Erlangga.
Sumarningsih, T. (2014). The effect of overtime work on construction workforce productivity. Civil Engineering Communication Media, 20(1), 63–69.
Sutrisno, E. (2017). Human resource management. Kencana Prenada Media Group.
Syamsuri, N. (2024). The effectiveness of overtime work on productivity, safety and health of workers in construction projects [Undergraduate thesis, Hasanuddin University].
Thomas, H. R. (1992). Effects of scheduled overtime on labor productivity. Journal of Construction Engineering and Management, 118(1).
Thomas, H. R., & Raynar, K. A. (1997). Scheduled overtime and labor productivity: Quantitative analysis. Journal of Construction Engineering and Management, 123(2).
Wignjosoebroto, S. (2000). Ergonomics, motion and time studies: Analytical techniques for improving work productivity (1st ed.). Guna Widya.
Wijaya, V., & Waty, M. (2023). The influence of the work environment, implementation of K3, and labor on labor productivity. JMTS: Journal of Civil Engineering Partners, 6(2), 355–366.
Zakaria, M., & Witjaksana, B. (2023). Analysis of labor productivity when carrying out overtime work in the East Coast Center 3 Surabaya project. Journal of Infomanpro, 12(1), 47–55.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jeny Lembang, Arthur H. Thambas, Grace Yoyce Malingkas
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
