Analysis of the Effectiveness of Using Autodesk Revit Applications in Increasing Work Productivity: a Case Study of the Construction of the Al-Multazam Islamic Boarding School Building, Kuningan
DOI:
https://doi.org/10.58344/jws.v3i8.705Keywords:
Autodesk Revit, BIM, Effectiveness, Construction, Quantity Take OffAbstract
The implementation of construction work, there are still many problems, namely schedule mismatches, delays, and cost calculations that are sometimes inaccurate because they still use conventional methods. In the Al-Multazam Islamic Boarding School Building Construction project, Kuningan still uses traditional methods, where this method has the potential for human error because in making calculations it can be wrong to enter data which will ultimately change the calculation results to be greater. This research aims to show that the BIM method is very important to be applied in construction projects to streamline work productivity in building construction projects. In this case, there are differences in the results of the calculation of Quantity Take Off on the project, the difference in the results of the analysis shows that there is a difference between the existing volume and the volume of the Quantity Take Off results using the BIM concept, Foot plate foundation work has an average difference of 6.67%, Tie Beam has a difference of 7.62%, Beams have a difference of 5.30%, Columns have a difference of 8.26%, and Floor Plates have an average difference of 2.51%. This research has implications for the application of BIM to enable a more structured, efficient, and accurate planning and implementation process, thereby reducing the potential for errors caused by human factors. In addition, the use of BIM can also increase efficiency in overall project management, including in schedule monitoring, cost estimation, and resource management, which in turn can increase work productivity on building construction projects.
References
Abdalhameed, B. F., & Naimi, S. (2023). Based BIM techniques to clash detection for construction projects. Periodicals of Engineering and Natural Sciences, 11(1), 239–245. https://doi.org/10.21533/pen.v11i1.3461
Akanbi, O. A., Oyedolapo, O., & Steven, G. J. (2019). Lean Principles in Construction. In Sustainable Construction Technologies: Life-Cycle Assessment. Elsevier Inc. https://doi.org/10.1016/B978-0-12-811749-1.00010-9
Ershadi, M., Davis, P., Jefferies, M., & Mojtahedi, M. (2021). Implementation of Building Information Modelling in infrastructure construction projects: a study of dimensions and strategies. International Journal of Information Systems and Project Management, 9(4), 43–59. https://doi.org/10.12821/ijispm090403
Hermawan;, Jose, G. P. G., Hendrayoga, A. E., Tjokrohadi, A., Nugroho, B. A., Dewata, C. A. C., Jebatu, E. M., Amelina, E. P., & Yulianto, M. S. (2021). THE CONSTRUCTION INDUSTRY RECOVER, REBUILD & RENEW IN THE PANDEMIC ERA. Analytical Biochemistry, viii–312.
Husin, A. E., Meidiyanto, H., Setyawan, T. L., Detty, B., Kelvin, M., & Husin, E. (2019). Key Success Factors Of Line Of Balance (LOB) And M-PERT Integration On The Development Of Wastewater Treatment Plant. International Journal of Engineering and Advanced Technology, 8(6), 986–990. https://doi.org/10.35940/ijeat.f8265.088619
Husnul Khatimi, Muhammad Reza Fardian, Y. S. (2021). Effectiveness of Applying Bim Based Cost Estimation in. ASTONJADRO: Jurnal Rekayasa Sipil, 10(1), 109–116.
Lee, M. L., Cheah, W. T., Lau, S. H., Lee, X. S., Abdullahi, A. M., & Wong, S. Y. (2020). Evaluation of practicality of virtual design and construction (VDC) with 5D building information modelling (BIM) through a case study. IOP Conference Series: Materials Science and Engineering, 943(1). https://doi.org/10.1088/1757-899X/943/1/012058
Machado, R. L., & Vilela, C. (2020). Conceptual framework for integrating bim and augmented reality in construction management. Journal of Civil Engineering and Management, 26(1), 83–94. https://doi.org/10.3846/jcem.2020.11803
Mesároš, P., Mandi?ák, T., & Behúnová, A. (2022). Use of BIM technology and impact on productivity in construction project management. Wireless Networks, 28(2), 855–862. https://doi.org/10.1007/s11276-020-02302-6
Michalski, A., Glodzinski, E., & Bode, K. (2021). Lean construction management techniques and BIM technology - Systematic literature review. Procedia Computer Science, 196, 1036–1043. https://doi.org/10.1016/j.procs.2021.12.107
Moradi, S., & Sormunen, P. (2023). Implementing Lean Construction: A Literature Study of Barriers, Enablers, and Implications. Buildings, 13(2). https://doi.org/10.3390/buildings13020556
Riztria Adinda, N., Abdul Malik Ibrahim, S., Sipil, T., Tinggi Teknologi Mandala Bandung Abstrak, S., & Kunci, K. (2021). Pengawasan Pekerjaan Struktur Pada Proyek Head Quarter Office Cv. Biensi Fesyenindo-Bandung. Isu Teknologi Stt Mandala, 16(2), 30–34.
Rodrigues, F., Alves, A. D., & Matos, R. (2022). Construction Management Supported by BIM and a Business Intelligence Tool. Energies, 15(9). https://doi.org/10.3390/en15093412
Sampaio, A. Z. (2021). Project management in office: BIM implementation. Procedia Computer Science, 196, 840–847. https://doi.org/10.1016/j.procs.2021.12.083
Sembiring, tamaulina B., Irmawati, Sabir, M., & Tjahyadi, I. (2023). Buku Ajar metodologi penelitian ( teori dan praktil).
Utari, R. P., & Pradana, N. (2023). Implementasi Sistem Building Information Modeling (BIM) Untuk Analisis Waktu dan Biaya (Studi Kasus Proyek Pembangunan Gedung Rumah Sakit Universitas Islam Malang). Jurnal Ilmiah Universitas Batanghari Jambi, 23(2), 1245. https://doi.org/10.33087/jiubj.v23i2.3994
Yaquini Ticllacuri, De Osambela, J. E. S., & Pimentel, J. F. F. (2023). Application of Revit Software to Improve Spatial Intelligence in Architecture Students in a Private University – Huancayo. International Journal of Professional Business Review, 8(10), e03882. https://doi.org/10.26668/businessreview/2023.v8i10.3882
Yönder, V. M., & Çavka, H. B. (2024). a Case Study of Clash Detection for Early Design Phases in Building Information Modelling. Livenarch+ Journal, 57–71.
Yuvita, R. L., & Budiwirawan, A. (2022). Analysis of the Advantages and Disadvantages of Using Autodesk Revit for the Dean Building of the Faculty of Education, Universitas Negeri Semarang. Jurnal Teknik Sipil Dan Perencanaan, 24(2), 91–98. https://doi.org/10.15294/jtsp.v24i2.36613
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Journal of World Science
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
